Learn how to build a simple 2x4 mobile workbench base and drill charging station, perfect for getting your garage shop storage dialed in!
Read More
Learn how to build this live edge epoxy resin "reverse river" table! I made this table with a Walnut live edge slab cast in black metallic epoxy resin, with a Maple base!
I made plywood countertops and matching shelving, added new lighting, and got things super organized for my DIY LAUNDRY ROOM MAKEOVER!
Read MoreI've completed my first tile floor installation and I put together this video to show you all of the tips and tricks I found along the way. Learn how to lay a tile floor from a beginner's perspective!
Read MoreLearn how to build butcher block countertops, which finish to apply to your counters, and how to install them!
Read MoreLearn how to build easy DIY drawers using pocket holes and plywood! Also, learn how to install Blum Tandem undermount soft close drawer slides.
Read MoreLearn how to build DIY frameless kitchen cabinets using pocket holes and plywood! I'll also show you how to apply edge banding, add soft close doors, and install the upper and base cabinets.
Read MoreWe're back with another camper van conversion build video! This time, I'll show you how to install a kitchen sink in a camper van. That's right, The Singletrack Sampler finally has running water in his van!
Read MoreIn this video and post, I'll show you how to build this simple but functional outfeed table, assembly table, or workbench (or all three!) with an MFT-style top full of dog holes!
Read MoreI set up a fully automated dust collection system in my new shop using iVac blast gates, the new Clearvue EF5 dust collector, and Nordfab duct work! Shop tour video next week, so stay tuned!
Read MoreIn this last part of the shop build series, I'll show you how we installed the doors, trim, and got my tools moved into the new shop!
Read MoreI built 9 of these simple DIY acoustic panels for the new workshop to reduce echo and absorb sound! They are a simple DIY project and can be built for a little as $20 each, way cheaper than commercial versions.
Read MoreIn part 3 of my shop build series, I'll show you how I installed drywall, including taping and mudding, as well as the plywood walls and fiber cement panels in the shop area.
Read MoreIn part 2 of my shop build series, I'll walk you through the rough-in electrical wiring, installing LED shop lighting, and adding soundproofing insulation.
Read MoreIn part 1 of my shop build series, I'll walk you through framing out the walls, doors & office in my new workshop!
Read MoreI built this modern TV stand or media console from Baltic Birch plywood and brass rod! This TV stand is perfect for storing all of your home theater electronics in one clean, modern package. I have plans available for this project as well, in case you’re interested.
Read MoreI built a power carved "dune" end table from oak, aluminum and glass while hanging out with the Modern Maker podcast guys! This was only my second time trying power carving but I really felt like I got the hang of it and really love the final project. Enjoy!
Read MoreI built this super simple DIY modern baby gate (or pet gate) to keep my little dude from taking a tumble down the stairs! This was a back to basics build and could easily be completed with a miter saw, drill, and sander. I used a few extra tools here and there (jointer and planer to get things extra flat), but they were really entirely optional.
Read MoreI know I want to do more with my Inventables X-Carve this year, so I added a bunch of upgrades to the machine, including Rockler t-track for better clamping and workholding, as well as a raised X-axis and brand new Z-axis. With these new upgrades, I can cut pieces up to 4 inches thick on the X-Carve, at speeds I was previously unable to achieve!
Read MoreMy metalworking shop has always been a bit of a mess, but it had gotten REALLY bad lately. I went back to the drawing board and gave that side of the shop a complete makeover, reorganizing it and optimizing the tool layout and workflow.
Read More