How To Build A DIY Modern Plywood Sofa Using 1 Sheet of Plywood

In this video, I'll show you how to build a modern sofa using a single sheet of ¾" plywood! The upholstery on this sofa was super simple and I used readily available materials to make the cushions. I have links to all of the items below, in case you want to build this sofa for yourself. 

DIY Modern Plywood Sofa Plans

I do have plans available for this project, if you're interested. The plans include an 11-page detailed PDF document including a detailed cutlist and cutting diagram. If you have any questions during the build, you can email me and I’ll do my best to help.

Materials Used For The Plywood Sofa:

• 1 4x8 sheet of ¾” Purebond plywood : http://bit.ly/purebond
• 1 1⁄4” Powerhead screws : http://amzn.to/2wii7sl
• 2 1⁄2” Powerhead screws : http://amzn.to/2wii7sl
• General Finishes Enduro Var : http://amzn.to/2wo7NgK
• Wood Glue : http://amzn.to/2xxReiO

For The Cushions: 

• Arrow 5/16" Staples : http://amzn.to/2iH5u5p
• ¼ of a 4x8 sheet of ½” plywood or two 2’ x 4’ panels : http://bit.ly/purebond
• Upholstery Fabric : JOANN or other fabric store
• 6 feet of 1” x 60” Medium Fiber Fill or Batting : http://bit.ly/foambymail
• Foam Padding, Lux Regular for the seat and HD36 for the back : http://bit.ly/foambymail
• Spray Adhesive : http://amzn.to/2wiDZUH
• Electric Knife : http://amzn.to/2xxDXa1

Tools Used:

• Arrow DCDT50 Cordless Stapler : http://amzn.to/2iGPiBb
• Circular Saw : http://amzn.to/2wJlWI9
• Jigsaw : http://amzn.to/2wJbYGB
• Drill : http://amzn.to/2xxMHNl
• Router : http://amzn.to/2iHSZGC
• Flush Trim Bit : http://amzn.to/2wT2x8e
• Chamfer Bit : http://amzn.to/2xNfFYN
• FastCap Flushmount Drill Bit : http://amzn.to/2iKv9KG

Hopefully you enjoyed this project! If you have any questions, let me know in the comments section below. Thanks and see you next week!