In this project, I'll show you how to build a DIY bottle lamp, dartboard cabinet, and YETI patio cooler stand, all using basic power tools from True Value Hardware.

Dartboard Cabinet Materials List:

• 2' x 2' ¾" plywood project panel
• 1x4x8
• 1x12x6
• Hinges
• Magnetic Catch
• Speedball India Ink : http://amzn.to/2kBkXS3
• Minwax Polycrylic
• Metal French Cleat Hardware
• Dartboard : http://amzn.to/2CMDfrn

Dartboard Cabinet Cut List:

Cut 1x4x8 into four pieces at the following lengths:

• (2) pieces at 22 ¾"
• (2) pieces at 24 ¼"

Cut two pieces from 1x12x6 at the following length:

• (2) pieces at 25 ½"

If you're using a ½" rabbeting bit, you shouldn't need to cut your 2' by 2' project panel.

Patio Cooler Materials List:

• YETI Tundra 45 Cooler
• 2' x 4' ¾" plywood project panel
• 1x8x8, I used Oak
• Hairpin Legs : http://amzn.to/2FpkZ9l

Patio Cooler Cut List:

Cut the 1x8x8 into four pieces at the following lengths:

• (2) pieces at 26 ½"
• (2) pieces at 14"

Cut 2' x 4' plywood project panel to following size (remeasure the size of your rabbeted area to confirm measurements):

• 25 ⅞" x 15"

Bottle Lamp Materials List:

• Empty Bottle
• Lamp Kit : http://amzn.to/2COINSf (this is the one I used, but I bought mine at True Value)
• Lamp Shade
• ⅜" Glass Drilling Bit
• Lamp Nipple
• Vase Filler Glass : http://amzn.to/2CKW66l

Thanks for checking out the build article, let me know if you have any questions in the comments section below. Until next time, happy building!