How To Build A DIY Bottle Lamp, Dartboard Cabinet & YETI Patio Cooler Stand
In this project, I'll show you how to build a DIY bottle lamp, dartboard cabinet, and YETI patio cooler stand, all using basic power tools from True Value Hardware.
Dartboard Cabinet Materials List:
- 2' x 2' ¾" plywood project panel
- Magnetic Catch
- Speedball India Ink : http://amzn.to/2kBkXS3
- Minwax Polycrylic
- Metal French Cleat Hardware
- Dartboard : http://amzn.to/2CMDfrn
Dartboard Cabinet Cut List:
Cut 1x4x8 into four pieces at the following lengths:
- (2) pieces at 22 ¾"
- (2) pieces at 24 ¼"
Cut two pieces from 1x12x6 at the following length:
- (2) pieces at 25 ½"
If you're using a ½" rabbeting bit, you shouldn't need to cut your 2' by 2' project panel.
Patio Cooler Materials List:
- YETI Tundra 45 Cooler
- 2' x 4' ¾" plywood project panel
- 1x8x8, I used Oak
- Hairpin Legs : http://amzn.to/2FpkZ9l
Patio Cooler Cut List:
Cut the 1x8x8 into four pieces at the following lengths:
- (2) pieces at 26 ½"
- (2) pieces at 14"
Cut 2' x 4' plywood project panel to following size (remeasure the size of your rabbeted area to confirm measurements):
- 25 ⅞" x 15"
Thanks for checking out the build article, let me know if you have any questions in the comments section below. Until next time, happy building!